INFORTREND TECHNOLOGY, INC.

IFT-3001 (WITH IFT-9021WS/WD/S UPGRADE BOARDS)

  Data bus:                  None

  Size:                      3.5 in. form-factor half height

  Hard drive supported:      Up to fourteen Fast SCSI-2 devices with
                             upgrades

  Floppy drives supported:   None



[Image]

                     LOWER BOARD CONNECTIONS

                   Function                         Location

  50-pin SCSI connector channel 0 - external           J1

  28-pin connector                                    CN1

  28-pin connector                                    CN2

                     UPPER BOARD CONNECTIONS

                   Function                         Location

  50-pin SCSI connector - external channel 1           J2

  9-pin serial port - external                         J3

  50-pin connector                                    CN3

  50-pin connector                                    CN4

  50-pin connector                                    CN5

  50-pin connector                                    CN6

                         UPGRADE BOARD CONNECTIONS

                    Function                             Location

  68-pin SCSI connector - external channel 2                J4

  9-pin fail-over port - external                           J5

  28-pin connector                                         CN7

  28-pin connector                                         CN8

      Note: 68-pin connector is on upgrade models FT-9021WS (Wide SCSI
       Single-Ended) or IFT=9021WD (Wide SCSI Differential). A 50-pin
          connector is on model IFT-9021S (8-bit Single-Ended) .

                           DRAM CONFIGURATIONS

          Size                               Bank 0

          2MB                            (1) 512KB x 36

          4MB                              (1) 1M x 36

          8MB                              (1) 2M x 36

          16MB                             (1) 4M x 36

          32MB                             (1) 8M x 36

   Note: Minimum of 2 MB DRAM must be installed with parity function.

  Minimum of 4 MB DRAM suggested for RAID-3 and RAID-5 configurations.